2024 Barko Utility Loaders 80XLE

Information

2024 Barko Utility Loaders 80XLE

Equipped with a telescoping boom that increases reach by up to 3 additional feet, the Barko 80XLE utility loader delivers an excellent power-to-weight ratio. Its maximum front lift capacity is 12,350 pounds.

Features may include:

Boom Construction
  • All-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance. The telescoping boom features a 3’ telescoping section providing either 25’ or 27’ of reach at maximum extension.
Dedicated Swing Circuit
  • A triple gear pump produces up to 62 gallons per minute, with one pump section dedicated to the planetary swing drive that allows simultaneous operation of the boom and swing system without losing flow to necessary functions.
360-Degree Rotation
  • Rotary manifold allows for 360-degree continuous boom rotation and provides electrical and hydraulic power to the lower frame.
Hydraulic Valves
  • Hydraulic control valves are mounded under the joysticks with manual linkages that control each valve section for boom and grapple functions.
  • Bolt-On Cylinder Glands
  • Bolt-on cylinder glands make on-site service easy, while seal rings extend product life. Cylinders are made of heavy-duty steel tubing, and heavy chrome cylinder rods are heat-treated for added strength.
Pedestal Heights
  • Various pedestal heights are available for truck or trailer mounting with or without the use of a small spacer.
Stabilizers
  • Telescopic stabilizers controlled from the platform or the ground help keep loads steady. Housings are attached to the pedestal with large bolts so they can be removed easily for service.
Standard Accessories
  • Mounting bolts and support plates are supplied. Loader is also equipped with load securing posts and dual ladders with non-slip treading.

Photos

Highlights

  • Sheridan, Arkansas
  • 2024
  • Barko
  • Utility Loaders 80XLE
  • Available
  • A-Frame: 25.625" (65 cm) | Stabilizer: 10' 3" (312 cm)
  • A-Frame: 5' 3" (158 cm)

Specifications

  • 2024
  • Barko
  • Utility Loaders
  • 80XLE
  • Stationary
  • Swing System: Continuous rotation on 27" (686 mm) external tooth turntable bearing, powered by hydraulic motor and single stage planetary gearbox
  • Triple gear pump producing 26/21/15 GPM (98/79/57 LPM) at 1,600 RPM
  • Operating: 3,200 psi (220 bar) main system
  • Sectional control type with mechanical joysticks | Heavy-wall tubing and 4-wire hose; independent swing system with direct-linked foot controls, rotary manifold to allow continuous rotation
  • Standard Boom: 22' to 25' (671 to 762 cm) telescoping | Horizontal Reach: 24' 10" (757 cm) | Vertical Reach: 37' 3" (1,140 cm) from ground when mounted on 44" (112 cm) truck frame | Main Boom Cylinder: 5" x 36" (127 x 914 mm) with 3" (76 mm) rod | Stick Boom Cylinder: 5" x 30" (127 x 762 mm) with 2.5" (63.5 mm) rod
  • A-Frame: 25.625" (65 cm) | Stabilizer: 10' 3" (312 cm)
  • A-Frame: 5' 3" (158 cm)
  • Telescopic stabilizers: 43" (109 cm) stroke cylinders enclosed in tubular and fabricated box style assembly with wear plates
  • Maximum Front - 25' (7.6m) telescoping boom, less attachment: 10,870 lbs (4,975 kg) with 5' (1.5 m) radius / 12,350 lbs (5,601 kg) with 10' (3.0 m) radius / 8,280 lbs (3,755 kg) with 15' (4.5 m) radius / 6,090 lbs (2,762 kg) with 20' (6.1 m) radius / 1,830 lbs (830 kg) at full reach
  • Tank: 45 gal. (170 L) with suction and return line filters
  • Total Operating: 5,985 lbs (2,715 kg) loader with telescoping boom with cylinders (excluding grapple and options)
  • Power - Source: Customer supplied power take-off | Boom - Structure: Fabricated box style design with all welded construction; bronze bushing with grease grooves at boom pivot points; (2) 55W halogen work lamps on stick boom | Cylinder: Hydraulic cylinders with spherical bearings and wear rings on glands and pistons; heavy wall honed steel tubing; heat-treated cylinder rods with heavy chrome plating; induction hardened rods and bolt-on glands