2024 Barko Utility Loaders 110XL

Information

2024 Barko Utility Loaders 110XL

The Barko 110XL Loader delivers high payload at a low total cost of operation. Equipped with standard features that set it apart from the competition, the 110XL lasts longer and works harder to deliver the results you demand.

Features may include:

Power Source
  • The 110XL is powered by a customer-supplied PTO.
Boom Construction
  • Wider, all-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance.
Dedicated Swing Motor
  • A triple gear pump produces up to 62 gallons per minute, with one pump section dedicated to the planetary swing drive that allows simultaneous operation of the boom and swing system without losing flow.
360-Degree Rotation
  • Rotary manifold allows for 360-degree continuous boom rotation and provides electrical and hydraulic power to the lower frame.
  • Hydraulic Valves
  • Sectional control type valves come with folding mechanical joysticks.
Cylinders
  • Features hydraulic cylinders with spherical bearings and heavy wall honed steel tubing. Heat treated cylinder rods have heavy chrome plating.
Operator Platform
  • Comfortable operator platform includes a locking, fold-down seat with armrests. The rotating platform includes beneath-the-seat style valve mounting and foot swing pedal.
Standard Accessories
  • Loader is equipped with load securing posts and dual ladders with non-slip treading. Other standard features include a house lock safety pin and mounting hardware.
Stabilizers
  • Telescopic stabilizers, controlled from the platform or the ground, help keep loads steady.

Photos

Highlights

  • Sheridan, Arkansas
  • 2024
  • Barko
  • Utility Loaders 110XL
  • Available
  • A-Frame: 25.625" (65 cm) | Stabilizer: 10' 3" (312 cm)
  • A-Frame: 5' 3" (158 cm)

Specifications

  • 2024
  • Barko
  • Utility Loaders
  • 110XL
  • Stationary
  • Swing System: Continuous rotation on 27" (686 mm) external tooth turntable bearing; foot pedal control
  • Triple gear pump producing 26/21/15 GPM (98/79/57 LPM) at 1,600 RPM
  • Operating: 3,200 psi (220 bar) main system
  • Sectional control type with folding mechanical joysticks | Heavy-wall tubing with high pressure hoses; independent swing system with direct-linked foot controls, rotary manifold to allow continuous rotation
  • Standard Boom: 29' (884 cm) | Horizontal Reach: 28' 5" (866 cm) | Main Boom Cylinder: 5" x 36" (127 x 914 mm) with 3" (76 mm) rod | Stick Boom Cylinder: 5" x 30" (127 x 762 mm) with 2.5" (63.5 mm) rod
  • A-Frame: 25.625" (65 cm) | Stabilizer: 10' 3" (312 cm)
  • A-Frame: 5' 3" (158 cm)
  • Telescopic stabilizers: 43" (109 cm) stroke cylinders
  • Maximum Front - (29' Boom): 3,110 lbs (1,411 kg) with 5' (1.5 m) radius / 12,100 lbs (5,488 kg) with 10' (3.0 m) radius / 8,100 lbs (3,674 kg) with 15' (4.6 m) radius / 6,050 lbs (2,774 kg) with 20' (6.1 m) radius / 4,810 lbs (2,182 kg) with 25' (7.6 m) radius / 1,770 lbs (803 kg) at full reach
  • Total Operating: 6,120 lbs (2,776 kg) loader with cylinders (excluding grapple and options)
  • Power - Source: Customer supplied power take-off | Boom - Structure: Fabricated box style design with all welded construction and wear plates; bronze bushing with grease grooves at boom pivot points | Cylinder: Hydraulic cylinders with spherical bearings; heavy wall honed steel tubing; heat-treated cylinder rods with heavy chrome plating