2024 Barko Fixed Harvesting Head CF18

Information

2024 Barko Fixed Harvesting Head CF18

Featuring a patent-pending design equipped with IQAN control system, onboard valving and center hose routing, the Barko CF18 fixed harvesting head provides speed and productivity for a variety of cut-to-length jobs.

Features may include:

IQAN Control System
  • IQAN system offers precise control of the harvesting head at all times.
360-Degree Rotation
  • 360-degree continuous rotation with center hose routing enhances maneuverability when cutting, while also protecting hoses from tangling or tearing, thereby reducing hose replacement costs.
Low Maintenance
  • Built with fewer moving parts, the CF18's only daily service requirements is greasing, thereby reducing downtime.

Photos

Highlights

  • Sheridan, Arkansas
  • 2024
  • Barko
  • Fixed Harvesting Head CF18
  • Available
  • Arms Open: 61" (155 cm) | Arms Closed: 52.5" (133 cm)

Specifications

  • 2024
  • Barko
  • Fixed Harvesting Head
  • CF18
  • Attachment For Harvesting
  • Roller: Piston | Roller Brand: Poclain MS11 | Size: 1,147 cc
  • System Voltage: 24-volt
  • Maximum Feed Force: 11.792 lbf (52.4 kN) | Rotator/Leveler Torque: 11,300 ft-lbf (15,321 Nm) at 2,450 psi (169 bar)
  • Maximum Chain: 51 ft/sec (15.5 m/sec) | Maximum Feed: 15 ft/sec (4.6 m/sec)
  • System: IQAN
  • Requirement: 80 GPM (302 LPM)
  • Requirement: 4,500 psi (310 bar)
  • Maximum Knife Opening: 29" (737 mm) | Maximum Full Coverage Delimb Diameter: 20" (508 mm) | Minimum Full Coverage Delimb Diameter: 4.5" (114 mm) | Main Saw - Bar Pitch: 0.75" (19 mm) | Maximum Diameter Cut: 24" (610 mm) | Maximum Roller Opening: 18.5" (470 mm) | Rotator/Leveler Rotation: 360° unlimited
  • 83.25" (211 cm)
  • Arms Open: 61" (155 cm) | Arms Closed: 52.5" (133 cm)
  • Bar: 33" (838 mm)
  • Chain Tank: 4 gal. (15.1 L)
  • Total Operating: 5,000 lbs (2,268 kg)
  • Joral Encoders: Non-contact | Delimb Pressure: Adjustable with float | Top Delimb Knife: Fixed | Movable Delimb Arms: 2 | Chain Tensioner: Automatic Jet Fit | Feed Rollers: 2 | Feed Roller Motors: 2