2024 Barko Stationary Electric Loaders 595-SE-ERS

Information

2024 Barko Stationary Electric Loaders 595-SE-ERS

The Barko 595-SE-ERS stationary electric loader utilizes an electric remote station. When mounted on a standard pedestal, it offers up to 32 feet (almost 10 meters) of horizontal reach.

Features may include:

Power Sources
  • The 595-SE-ERS is available with a 125-HP (93 kW) open drip proof encapsulated electric motor, electrical enclosure with motor start circuit, and start/stop switches supplied for the control console.
Pedestal
  • Loader is mounted a standard 39.5-inch-tall (1003mm) pedestal with 52-inch (1,321 mm) diameter bottom plate.
Load Sensing Hydraulics
  • Load sensing valves and pump deliver excellent metering by matching pressure and flow. Efficient and precise grapple functions reduce operator fatigue.
Joystick Controls
  • Ergonomically designed, multi-functional, dual electric-controlled joysticks are supplied for mounting into the operator station.
  • Boom Construction
  • Wider, all-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance.
Swing Torque
  • Dual motors and planetary gearboxes produce 55,000 foot-pounds (74,570 Nm) of swing torque.
Zinc Plated Pins
  • Extra large zinc plated pins and bolts provide added durability in high-stress areas.
Centralized Valves
  • Centralized hydraulic control valves are easily accessible.
Bolt-On Cylinder Glands
  • Bolt-on cylinder glands make on-site service easy, while piston rings extend product life. Cylinders are made of heavy-duty steel tubing, and heavy chrome cylinder rods are heat-treated for added strength.
Service
  • Removable service panels simplify maintenance tasks.

Photos

Highlights

  • Sheridan, Arkansas
  • 2024
  • Barko
  • Stationary Electric Loaders 595-SE-ERS
  • Available
  • Pedestal: 33" (838 mm)

Specifications

  • 2024
  • Barko
  • Stationary Electric Loaders
  • 595-SE-ERS
  • Stationary
  • 125 HP (93 kW) / operating at 1,800 RPM
  • Drip proof encapsulated motor
  • Motor: 3-phase, 460-volts, 60 Hz | Collector: 4-pass, 300 amp capacity, located in pedestal base; continuous rotation only | Start/Stop: Key start switch and emergency stop switch mounted on control console | NEMA 4 enclosure with motor start circuit, 3-phase power monitor and circuit breaker
  • Swing System - Braking: Hydrostatic dynamic braking with 73,000 ft-lbf (98,975 Nm) braking swing torque
  • Swing Torque: 55,000 ft-lbf (74,570 Nm); 100% theoretical
  • Rotation/Swing Speed: Continuous on 54" (1,372 mm) internal tooth turntable bearing; 7.5 RPM, power transmitted though dual piston motors and planetary gearboxes
  • 90 GPM (341 LPM), variable displacement piston
  • Operating: 3,600 psi (248 bar) main system
  • Heavy-wall tubing and multi-wire braided hose; quick disconnect diagnostic ports, accumulator for main boom cushioning; rotary manifold for continuous rotation
  • Tail Swing: 8' 6" (259 cm) without counterweight | Top Plate: 49" (1,245 mm) diameter | Bottom Plate: 52" (1,321 mm) diameter | Bottom Holes: (36) 1-3/8" (35 mm) diameter holes equally spaced on a 46" (1,168 mm) diameter circle | Horizontal Reach: 32' (975 cm) | Vertical Reach: 37' 7" (1,145 cm) with 33" (84 cm) pedestal | Main Boom Cylinder: 7" x 51" (178 x 1,295 mm) with 4" (102 mm) rod | Stick Boom Cylinder: 7" x 35" (178 x 889 mm) with 4" (102 mm) rod
  • 9' 3" (282 cm)
  • 40' 7" (1,237 cm) with 32' boom extended
  • 8' 5" (257 cm)
  • Pedestal: 33" (838 mm)
  • Tank: 120 gal. (454 L) with return line filter, shut-off valve on pump suction line
  • Maximum: 38,820 lbs (17,608 kg) | Maximum (32' Boom): 38,820 lbs (17,608 kg) with 12' (3.7 m) radius / 30,290 lbs (13,739 kg) with 15' (4.6 m) radius / 22,550 lbs (10,229 kg) with 20' (6.1 m) radius / 17,950 lbs (8,142 kg) with 25' (7.6 m) radius / 12,810 lbs (5,811 kg) with 30' (9.1 m) radius / 7,770 lbs (3,524 kg) with 32' (9.8 m) radius
  • Total Operating: 28,000 lbs (12,701 kg) without attachment
  • Boom - Structure: All-welded construction with fabricated box type design; aluminum bronze bushings with grease grooves at boom pivot points | Cylinder: Hydraulic cylinders with wear rings on pistons and bolt-on glands; heavy-duty steel tubing; induction hardened rods with heavy chrome plating; spherical bearings at all pivots