2024 Barko Stationary Electric Loaders 295-SER-ERS

Information

2024 Barko Stationary Electric Loaders 295-SER-ERS

Barko's 295-SER-ERS stationary electric loader features a remote power unit. The machine's load sensing hydraulic valves and pump help match pressure and flow, and a 150-gallon (568 L) hydraulic tank allows for long operating intervals.

Features may include:

Power Sources
  • The 295-SER-ERS is available with a 100-HP (75 kW) open drip proof encapsulated electric motor, electrical enclosure with motor start circuit, and start/stop switches supplied for the control console.
Pedestal
  • Loader is mounted a standard 33-inch-tall (838 mm) pedestal with 39-inch (991 mm) diameter bottom plate.
Load Sensing Hydraulics
  • Load sensing valves and pump deliver excellent metering by matching pressure and flow. Efficient and precise grapple functions reduce operator fatigue.
Joystick Controls
  • Ergonomically designed, multi-functional, dual electric-controlled joysticks are supplied for mounting into the operator station.
  • Boom Construction
  • Wider, all-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance.
Swing Torque
  • Dual motors and planetary gearboxes produce 30,000 foot-pounds (40,674 Nm) of swing torque.
Zinc Plated Pins
  • Extra large zinc plated pins and bolts provide added durability in high-stress areas.
Centralized Valves
  • Centralized hydraulic control valves are easily accessible.
Bolt-On Cylinder Glands
  • Bolt-on cylinder glands make on-site service easy, while piston rings extend product life. Cylinders are made of heavy-duty steel tubing, and heavy chrome cylinder rods are heat-treated for added strength.

Photos

Highlights

  • Sheridan, Arkansas
  • 2024
  • Barko
  • Stationary Electric Loaders 295-SER-ERS
  • Available
  • Pedestal: 33" (838 mm)

Specifications

  • 2024
  • Barko
  • Stationary Electric Loaders
  • 295-SER-ERS
  • Stationary
  • 100 HP (75 kW) / operating at 1,800 RPM
  • Drip proof encapsulated motor
  • Motor: 3-phase, 460-volts, 60 Hz | Collector: 4-pass, 300 amp capacity, located in pedestal base; continuous rotation only | Start/Stop: Key start switch and emergency stop switch mounted on control console | NEMA 4 enclosure with motor start circuit, 3-phase power monitor and circuit breaker
  • Swing System - Braking: Hydrostatic dynamic braking with 40,000 ft-lbf (54,232 Nm) braking swing torque
  • Swing Torque: 30,000 ft-lbf (40,674 Nm); 100% theoretical
  • Rotation/Swing Speed: Continuous on 39" (991 mm) internal tooth turntable bearing; 8 RPM, power transmitted though dual Geroler motors and planetary gearboxes
  • 70 GPM (265 LPM), variable displacement piston
  • Operating: 3,000 psi (206 bar) main system
  • Heavy-wall tubing and multi-wire braided hose; quick disconnect diagnostic ports, accumulator for main boom cushioning; rotary manifold for continuous rotation
  • Tail Swing: 8' 6" (259 cm) without counterweight | Top Plate: 35.5" (902 mm) diameter | Bottom Plate: 39" (991 mm) diameter | Bottom Holes: (30) 1-3/8" (35 mm) diameter holes equally spaced on a 34.5" (876 mm) diameter circle | Horizontal Reach: 30' (914 cm) | Vertical Reach: 36' 9" (1,120 cm) with 33" (84 cm) pedestal | Main Boom Cylinder: 6" x 51" (152 x 1,295 mm) with 3.5" (89 mm) rod | Stick Boom Cylinder: 6" x 35" (152 x 889 mm) with 3.5" (89 mm) rod
  • 6' 3" (191 cm)
  • 32' 3" (983 cm) with 30' boom extended
  • 3' 3.5" (100 cm)
  • Pedestal: 33" (838 mm)
  • Tank: 150 gal. (568 L) with return line filter, shut-off valve on pump suction line
  • Maximum: 22,820 lbs (10,351 kg) | Maximum (30' Boom): 19,960 lbs (9,054 kg) with 10' (3.0 m) radius / 17,390 lbs (7,888 kg) with 15' (4.6 m) radius / 12,920 lbs (5,860 kg) with 20' (6.1 m) radius / 10,240 lbs (4,645 kg) with 25' (7.6 m) radius / 5,420 lbs (2,458 kg) with 30' (9.1 m) radius
  • Total Operating: 18,000 lbs (8,165 kg) without attachment
  • Boom - Structure: All-welded construction with fabricated box type design; aluminum bronze bushings with grease grooves at boom pivot points | Cylinder: Hydraulic cylinders with wear rings on pistons and bolt-on glands; heavy-duty steel tubing; induction hardened rods with heavy chrome plating; spherical bearings at all pivots