2024 Barko Industrial Wheeled Tractors - Tier 3 930

Information

2024 Barko Industrial Wheeled Tractors - Tier 3 930

Built with productivity in mind, the Barko 930 industrial tractor is powered by a 305-horsepower engine. Featuring sound-insulated cab and excellent visibility, the 930 powers through tough work smoothly and efficiently.

Features may include:

Engine
  • The 930 is powered by a 305-HP Cummins QSC8.3 Tier 3 diesel engine. The unit includes a high-capacity anti-clog radiator with auto reversing fan.
Load Sensing Hydraulics
  • Unlike open loop systems that waste fuel, Barko's load sensing hydraulic system automatically adjusts attachment performance according to the load, resulting in greater productivity and higher efficiency.
Hydraulics / Attachment Drive
  • With pressure ratings up to 5,000 psi, a high-flow hydraulic pump delivers far more horsepower to the attachment than competitive machines. High capacity oil cooler and variable displacement piston pumps keep hydraulic oil cool to maximize service life. A high-pressure 20 micron return filter helps prevent debris from damaging pumps and valves.
Travel System
  • A hydrostatic transmission with two-speed transfer case allows for controlled operation speeds and travel speeds up to 13.0 mph (20.9 km/h).
Articulation Joint
  • A unique 45-degree articulation joint withstands extreme stress and tough terrain, while the machine's overall maneuverable design allows for work in tight spaces.
High Strength Construction
  • Weld blending and engineered sweeping curves provide added strength and increased fatigue resistance.
Bolt-On Cylinder Glands
  • High-strength hydraulic cylinders with bolt-on glands combine maximum durability with easy serviceability on-site.
Cover Plates
  • Cover plates, guards and seals help prevent debris from getting into the machine.
Centralized Lubrication
  • Routine maintenance is simplified by a centralized lubrication station that provides one access point for greasing steering cylinders and axles.
Service Access
  • Tractor includes lockable and removable side panels, as well as removable side, front and bottom brake, engine and transmission covers.
Operator Cab
  • ROPS and FOPS certified, the tightly sealed, vibration-isolated floating cab features sound insulation and an adjustable bucket seat with 4-point harness. Climate controlled with air conditioning and heating with defroster, the cab includes dual joystick controls, pilot operated foot travel and brake pedals, and various control buttons.
Visibility
  • The 930 offers tinted Lexan glass on all windows. An air knife system keeps the front windshield clear of debris. A total of 9 mounted cab lights provide enhanced visibility around the machine.
Fuel Tank
  • 126-gallon (477 L) fuel tank capacity allows for longer operating intervals.

Photos

Highlights

  • Sheridan, Arkansas
  • 2024
  • Barko
  • Industrial Wheeled Tractors - Tier 3 930
  • QSC8.3
  • Hydrostatic; variable displacement pump and motor with pilot operated foot controls, combined with two-speed transfer case
  • Available

Specifications

  • 2024
  • Barko
  • Industrial Wheeled Tractors - Tier 3
  • 930
  • Other
  • QSC8.3
  • 305 HP (227 kW)
  • Cummins
  • Tier III
  • 2,200 RPM
  • Oil Cooler: High capacity, anti-clog type with reversing fan integrated with radiator and charge air cooler
  • Axles - Front / Rear: Hydraulic
  • Hydrostatic; variable displacement pump and motor with pilot operated foot controls, combined with two-speed transfer case
  • Joystick controlled
  • Service/Emergency Brake: Hydrostatic-dynamic front axle internal wet disc brake with foot pedal in cab
  • Switch operated control on dash with wet disc brakes, located on drive line at transmission
  • Standard (8' 11" machine width) 28L–26 20 ply
  • 25 x 26 reinforced wheels standard
  • 160 amp
  • Starting System: 12-volt with ignition key
  • Travel: 0-5.0 MPH (0-8.0 km/h) low gear / 0-13.0 MPH (0-20.9 km/h) high gear
  • Lift/Tilt/Steer: Variable displacement, load sensing piston | Travel / Attachment Drive: Variable displacement piston
  • Lift/Tilt/Steer: Producing 41 GPM (155 LPM) @ 3,600 psi (24,821 kPa) | Travel: Producing 58 GPM (220 LPM) @ 5,000 PSI (34,474 kPa) | Attachment Drive: Producing 96 GPM (363 LPM) @ 5,000 PSI (33,095 kPa)
  • Attachment Drive Return Filter: High pressure 20 micron | Articulation: 45°
  • Maximum Pin: 8' 6" (259 cm)
  • 22" (558 mm)
  • 9' (274 cm)
  • Without Attachment: 20' 6" (625 cm)
  • 8' 11" (272 cm)
  • 10' 8.5" (326 cm)
  • 15' 9" (480 cm) outside tires (increases with larger tires)
  • 126 gal. (477 L)
  • Reservoir: 87 gal. (329 L)
  • Total Operating: 30,000 lbs (13,608 kg) without attachment
  • Axles - Type: All wheel drive planetary axles / Front: Rigid / Rear: Oscillation | Power View Display: Engine oil pressure, engine RPM, engine load %, hour meter, engine temperature, volt meter | Audio/Visual Warning System: Engine oil pressure, engine temperature | Analog Audio/Visual Warning System: Hydraulic oil temperature, low hydraulic oil level, park brake, differential lock engaged, high pressure filter service, attachment pump filter service, fuel level