CALL FOR PRICING
The 856H Wheel Loader boasts an advanced climate control system with eight all-round vents, 5 selection modes and 6 kW of cooling capacity, creates the perfect working environment whatever the weather.
Our hydraulic system delivers an impressively high breakout force of 175 kN with control and precision delivering power to where the operator really needs it. Lifting and cycle speeds are equally impressive at 5.9 seconds and 10.3 seconds, respectively. This is power where you need it, improving penetration, allowing simultaneous lift and tilt functions to be executed and reducing hydraulic waste.
Heavyweight work can be tough on man and machine. LiuGong’s next generation ride control, teamed with automated bucket positioning sets the new benchmark for heavy lifting applications. Loading shocks and impacts are greatly reduced, that’s good news for operators and for the machine’s longevity. Smoother load handling and maneuverability around the site has been noticeably improved with material spillage greatly reduced, leading to faster, more productive cycle times, reduced fuel consumption and higher operator performance and satisfaction.
The 856H Wheel Loader boasts an advanced climate control system with eight all-round vents, 5 selection modes and 6 kW of cooling capacity, creates the perfect working environment whatever the weather.
Our hydraulic system delivers an impressively high breakout force of 175 kN with control and precision delivering power to where the operator really needs it. Lifting and cycle speeds are equally impressive at 5.9 seconds and 10.3 seconds, respectively. This is power where you need it, improving penetration, allowing simultaneous lift and tilt functions to be executed and reducing hydraulic waste.
Heavyweight work can be tough on man and machine. LiuGong’s next generation ride control, teamed with automated bucket positioning sets the new benchmark for heavy lifting applications. Loading shocks and impacts are greatly reduced, that’s good news for operators and for the machine’s longevity. Smoother load handling and maneuverability around the site has been noticeably improved with material spillage greatly reduced, leading to faster, more productive cycle times, reduced fuel consumption and higher operator performance and satisfaction.
- 2025
- LiuGong
- Large Wheel Loaders
- 877H
- Large
- Model: QSL9
- Regulation: Tier 4 Final / Stage IV
- Cummins
- Max gross: 331 hp (247 kW) @ 2,000 rpm | Max net: 315 hp (235 kW) @ 2,000 rpm
- Peak: 1,160 lb-ft (1,573 N-m) @ 1,400 rpm
- 543 in3 (8.9 L)
- 6
- Turbocharged & air-to-air intercooled
- Type: Countershaft, power shift | Torque converter: Single-stage, three-element | Maximum travel speed, fwd: 24.8 mph (40 km/h) | Maximum travel speed, rev: 17.6 mph (28.4 km/h) | Number of speeds, fwd: 4 | Number of speeds, rev: 3
- Limited slip
- Limited slip
- Configuration: Articulated
- Type: Wet discs brake | Actuation: Hydraulic
- Type: Electro-hydraulic | Actuation: Hydraulic
- Width over tires: 9 ft 9 in (2,970 mm) | 26.5R25 L3 tire
- Width over tires: 9 ft 9 in (2,970 mm) | 26.5R25 L3 tire
- Bucket breakout force: 44,961 lbf (200 kN)
- Steering pressure: 3,002 psi (20.7 MPa) | System pressure: 3,771 psi (26 MPa)
- Piston
- Raise: 5.8 s | Dump time: 1.3 s | Float down time: 3.2 s | Total cycle time: 10.3 s
- Axle oscillation: ±12° | Bucket rollback at ground level: 45° | Bucket rollback at carry: 49° | Turn angle, either side: 38° | Rear angle of departure: 26°
- Maximum hinge pin height: 14 ft 3 in (4,355 mm) | Dump clearance at full height discharge: 10 ft 4 in (3,150 mm) | Dump reach at full height discharge: 4 ft 3 in (1,312 mm) | Bucket rollback at maximum height: 60° | Maximum dump angle at full height: 45° | Cab height: 11 ft 9 in (3,580 mm)
- Maximum digging depth, bucket level: 4 in (100 mm)
- 19 in (485 mm)
- 11 ft 8 in (3,550 mm)
- Wheel tread: 7 ft 5 in (2,270 mm)
- With bucket down: 29 ft 10 in (9,100 mm)
- bucket carry: 24 ft 3 in (7,400 mm)
- of tire: 21 ft 9 in (6,625 mm)
- over bucket: 10 ft 4 in (3,150 mm)
- Bucket capacity: 5.5 yd3 (4.2 m3 )
- Tipping load - straight: 42,968 lb (19,490 kg) | Tipping load - full turn: 35,450 lb (16,080 kg)
- Tank: 98.2 gal (372 L) | Transmission: 13.2 gal (50 L) | DEF tank: 5.0 gal (19 L)
- 8.7 gal (33 L)
- 9.5 gal (36 L)
- 58.1 gal (220 L)
- Axles, each: 15.8 gal (60 L)
- Axles, each: 15.8 gal (60 L)
- Operating: 54,013 lb (24,500 kg)
- Sheridan, Arkansas
- New
- 2025
- LiuGong
- Large Wheel Loaders 877H
- Model: QSL9
- Type: Countershaft, power shift | Torque converter: Single-stage, three-element | Maximum travel speed, fwd: 24.8 mph (40 km/h) | Maximum travel speed, rev: 17.6 mph (28.4 km/h) | Number of speeds, fwd: 4 | Number of speeds, rev: 3
- Available
- over bucket: 10 ft 4 in (3,150 mm)
- Maximum hinge pin height: 14 ft 3 in (4,355 mm) | Dump clearance at full height discharge: 10 ft 4 in (3,150 mm) | Dump reach at full height discharge: 4 ft 3 in (1,312 mm) | Bucket rollback at maximum height: 60° | Maximum dump angle at full height: 45° | Cab height: 11 ft 9 in (3,580 mm)