The 856H Wheel Loader boasts an advanced climate control system with eight all-round vents, 5 selection modes and 6 kW of cooling capacity, creates the perfect working environment whatever the weather. The hydraulic system delivers an impressively high breakout force of 175 kN with control and precision delivering power to where the operator really needs it. Lifting and cycle speeds are equally impressive at 5.9 seconds and 10.3 seconds. Additionally, the 856H’s automatic powershift transmission helps even the newest operator perform like a fuel wise professional matching the machine’s performance perfectly to the job. Engine: Cummins QSB6.7 Tier 4 Final Gross Power: 225 hp (168 kW) Operating Weight: 42,540 lb (19,296 kg) Bucket Capacity: 4.2 yd3 (3.2 m3)
Photos
Highlights
Sheridan, Arkansas
New
2025
LiuGong
Medium Wheel Loaders 856HV
B6.7
Countershaft, powershift
Available
over tires 9 ft (2,750 mm) | over bucket 9 ft 7 in (2,928 mm)
Maximum hinge pin height 13 ft 7 in (4,156 mm) | Dump clearance at full height discharge 9 ft 5 in (2,862 mm) | Dump reach at full height discharge 3 ft 11 in (1,207 mm) | Bucket rollback at max. height 62.3° | Max. dump angle at full height 45° | Cab height 11 ft 3 in (3,450 mm)
Specifications
2025
LiuGong
Medium Wheel Loaders
856HV
Medium
B6.7
Stage V
Cummins
Gross power 245 hp (183 kW) @ 1,700 rpm | Net power 233 hp (174 kW) @ 1,700 rpm
Peak torque 875 lbf·ft (1186 N·m) @ 1,300 rpm | Torque converter Single stage, three elements
6
1.77 gal (6.7 L)
Turbocharged & Air-to-air intercooled
Countershaft, powershift
LSD
LSD
configuration Flow amplification valve
Wet disc brake | Service brake actuation Single pedal+Fully hydraulic
Parking brake type Drum | Parking brake actuation SAHR
Raise 5.3 s | Dump time 1.4 s | Float down time 3.5 s | Total cycle time 10.2 s
Bucket rollback at ground level 42.7° | Bucket rollback at carry 48° | Turn angle, either side 38° | Rear angle of departure 28°
Maximum hinge pin height 13 ft 7 in (4,156 mm) | Dump clearance at full height discharge 9 ft 5 in (2,862 mm) | Dump reach at full height discharge 3 ft 11 in (1,207 mm) | Bucket rollback at max. height 62.3° | Max. dump angle at full height 45° | Cab height 11 ft 3 in (3,450 mm)
Max. digging depth, bucket level 6 in (150 mm)
1 ft 4 in (431 mm)
10 ft 10 in (3,320 mm)
Wheel tread 7 ft (2,150 mm)
over tires 9 ft (2,750 mm) | over bucket 9 ft 7 in (2,928 mm)
with bucket down 27 ft 3 in (8,303 mm)
bucket carry 22 ft 7 in (6,887 mm) | outside of tire 20 ft 4 in (6,195 mm)
Number of speeds, fwd 4 | Number of speeds, rev 3 | Axle oscillation ±12°
71.3 gal (270 L)
4.8 gal (18 L)
11.6 gal (44 L)
66.6 gal (252 L)
11.6 gal /11.4 gal (44 L/43L)
11.6 gal/12.7 gal (44L/48L)
Tipping load - straight 34,646 lb (15,715 kg) | Tipping load - full turn 30,086 lb (13,647 kg)